Cogan Blog
Insights, guides, and industry trends on mezzanines, industrial storage, and warehouse optimization.
Articles are compiled from publicly available industry sources for informational purposes only. Images are illustrative and actual products may vary.
Cantilever Racking for Mixed-Length Stock: Build an Inventory Plan
Plan cantilever racking for mixed-length stock by grouping inventory according to its dimensions, weight, support needs and handling method. Keep a record of both the full incoming bundle and the smaller quantities that remain after picking. A rack that suits a complete bundle may need a different storage arrangement for short remnants or loose pieces.
Cantilever vs Pallet Racking: Choose for the Load and Picking Method
Cantilever racking offers open-front support on projecting arms, making it a candidate for long or awkwardly shaped materials. Pallet racking is arranged around supported pallet loads between frames. Choose by the stored unit, its support needs and the handling process rather than by the familiar name of a rack.
How to Order Cantilever Racking: A Quote-Ready Checklist
To order cantilever racking, provide a load schedule, a measured layout, the handling method and the site's installation conditions. Those inputs allow the supplier to select the configured system and provide meaningful capacity and pricing information. Ordering from a photograph or rack height alone leaves important decisions unresolved.
Used vs New Cantilever Racking: What to Compare Before Buying
Compare used and new cantilever racking on suitability, documented capacity, condition, completeness and installed scope. A low purchase price does not establish that a used rack matches your loads or can be installed as supplied. Start with the storage requirement, then assess each proposed system against it.
Narrow-Aisle Cantilever Racking: Check the Truck Before the Aisle
Very narrow aisle cantilever racking is a coordinated storage and handling arrangement. The truck, its load, the guide system and the rack layout must work together. Select the handling approach before committing to an aisle width; a narrow drawing alone does not establish a workable warehouse.
Outdoor Cantilever Racking: Finish, Roofing and Site Planning
Outdoor cantilever racking needs a design that accounts for the stored loads and the site's environmental and support conditions. Finish selection, drainage, foundations or slab conditions, and any roof are part of that discussion. An indoor rack should not be moved outdoors or fitted with a canopy without review.
Single-Sided vs Double-Sided Cantilever Racks
Single-sided cantilever racks provide storage access from one side of the columns; double-sided configurations provide arms on both sides. The choice depends on available access, load distribution, handling routes and the approved structural arrangement. Double-sided does not automatically mean twice the usable capacity of a given floor area.
Cantilever Racks for Sheet Material: Supports, Overlays and Access
Sheet material storage needs support across the intended load and a handling method that keeps the material controlled during placement and retrieval. Cantilever racks may suit the application, but arms, overlays or other accessories must be selected for the specific material and approved rack configuration.
Industrial Pipe Storage Racks: Cantilever Planning for Tube and Bar
Cantilever racks can provide accessible storage for long pipe, tube and bar stock. The design needs the material's length, weight, bundle shape and support requirements. Round or irregular items also require an appropriate retention and handling plan; the open front of a rack does not remove the need to control the load.
© 2025 Cogan Wire and Metal Products Ltd., all rights reserved.